FMG 123 loaded crosses FMG 727 empty 5km.

As a loaded FMG train behind AC44C6M loco 123 and SD70ACe 704 glide under the Great Northern Highway bridge as they approach the port, an empty departs the port behind SD70ACe-P6 loco 727 and AC44C6M loco 109 with 244 empty waggons in tow, the cross happened right in front of me at 1722 hours, Wednesday May 7, 2025.

The video shows the loaded coming around the 5 km curve on the east track and then the empty proceeding south away from the port on the west track. And as the loaded reappears we see the tail of both trains in the end.

Waggon consist for the empty train was [format is slave waggon - master waggon builder;]:

5043 - 6044 CNR QRRS; 5049 - 6050 CNR QRRS; 5987 - 6988 CSR Yangtze; 1319 - 2320 CSR Zhuzhou; 3617 - 4618 CNR QRRS; 7537 - 8538 CRRC Yangtze; 3237 - 4238 CNR QRRS; 3523 - 4524 CNR QRRS; 5773 - 6774 CSR Yangtze; 5025 - 6026 CNR QRRS; 1671 - 2672 CSR Zhuzhou; 3585 - 4586 CNR QRRS; 3443 - 4444 CNR QRRS; 5939 - 6940 CSR Yangtze; 1769 - 2770 CSR Zhuzhou; 5547 - 6548 CNR QRRS; 9165 - 10166 CRRC Qiqihar; 5887 - 6888 CSR Yangtze; 7315 - 8316 CSR Yangtze; 3925 - 4926 CNR QRRS; 3413 - 4414 CNR QRRS; 9689 - 10690 CRRC Qiqihar; 7609 - 8610 CRRC Yangtze; 5415 - 6416 CNR QRRS; 9441 - 10442 CRRC Qiqihar; 7701 - 8702 CRRC Yangtze; 1203 - 2204 CSR Zhuzhou; 5669 - 6670 CNR QRRS; 5257 - 6258 CNR QRRS; 7631 - 8632 CRRC Yangtze; 3603 - 4604 CNR QRRS; 5435 - 6436 CNR QRRS; 9197 - 10198 CRRC Qiqihar; 3247 - 4248 CNR QRRS; 7067 - 8068 CNR QRRS; 5897 - 6898 CSR Yangtze; 9029 - 10030 CRRC Yangtze; 5087 - 6088 CNR QRRS; 9071 - 10072 CRRC Yangtze; 5555 - 6556 CNR QRRS; 5585 - 6586 CNR QRRS; 7683 - 8684 CRRC Yangtze; 5759 - 6760 CSR Yangtze; 1657 - 2658 CSR Zhuzhou; 9407 - 10408 CRRC Qiqihar; 5391 - 6392 CNR QRRS; 9489 - 10490 CRRC Qiqihar; 1739 - 2740 CSR Zhuzhou; 9779 - 10780 CRRC Qiqihar; 9673 - 10674 CRRC Qiqihar; 9169 - 10170 CRRC Qiqihar; 3533 - 4534 CNR QRRS; 1009 - 2010 CSR Zhuzhou; 7115 - 8116 CNR QRRS; 3755 - 4756 CNR QRRS; 7979 - 8980 CRRC Yangtze; 9327 - 10328 CRRC Yangtze; 7831 - 8832 CRRC Yangtze; 3145 - 4146 CNR QRRS; 3065 - 4066 CNR QRRS; 7535 - 8536 CRRC Yangtze; 5791 - 6792 CSR Yangtze; 3123 - 4124 CNR QRRS; 3111 - 4112 CNR QRRS; 5515 - 6516 CNR QRRS; 7641 - 8642 CRRC Yangtze; 5409 - 6410 CNR QRRS; 9557 - 10558 CRRC Qiqihar; 5989 - 6990 CSR Yangtze; 9205 - 10206 CRRC Qiqihar; 7915 - 8916 CRRC Yangtze; 7961 - 8962 CRRC Yangtze; 5387 - 6388 CNR QRRS; 3531 - 4532 CNR QRRS; 5371 - 6372 CNR QRRS; 3869 - 4870 CNR QRRS; 9599 - 10600 CRRC Yangtze; 9163 - 10164 CRRC Qiqihar; 9605 - 10606 CRRC Yangtze; 9135 - 10136 CRRC Qiqihar; 7459 - 8460 CRRC Yangtze; 7519 - 8520 CRRC Yangtze; 3865 - 4866 CNR QRRS; 1527 - 2528 CSR Zhuzhou; 5355 - 6356 CNR QRRS; 7913 - 8914 CRRC Yangtze; 9291 - 10292 CRRC Qiqihar; 5013 - 6014 CNR QRRS; 3563 - 4564 CNR QRRS; 7871 - 8872 CRRC Yangtze; 7181 - 8182 CNR QRRS; 5831 - 6832 CSR Yangtze; 3929 - 4930 CNR QRRS; 5397 - 6398 CNR QRRS; 5705 - 6706 CNR QRRS; 5465 - 6466 CNR QRRS; 1559 - 2560 CSR Zhuzhou; 5885 - 6886 CSR Yangtze; 3683 - 4684 CNR QRRS; 9319 - 10320 CRRC Yangtze; 3059 - 4060 CNR QRRS; 7829 - 8830 CRRC Yangtze; 9703 - 10704 CRRC Qiqihar; 5217 - 6218 CNR QRRS; 9437 - 10438 CRRC Qiqihar; 7965 - 8966 CRRC Yangtze; 3631 - 4632 CNR QRRS; 9363 - 10364 CRRC Qiqihar; 7203 - 8204 CNR QRRS; 7467 - 8468 CRRC Yangtze; 1539 - 2540 CSR Yangtze; 9369 - 10370 CRRC Qiqihar; 7817 - 8818 CRRC Yangtze; 5339 - 6340 CNR QRRS; 11089 - 12090 CRRC Qiqihar; 7361 - 8362 CRRC Yangtze; 1599 - 2600 CSR Zhuzhou and CRRC Yangtze 2nd style ribbed; 5003 - 6004 CNR QRRS; 7873 - 8874 CRRC Yangtze; 5483 - 6484 CNR QRRS; 3241 - 4242 CNR QRRS; 9553 - 10554 CRRC Qiqihar.

A quick arvo on the 4th of June at FMG.

A bit over an hour was spent at my usual hack spot for FMG, between the 5 km curve and the entrance to their port yard, on the afternoon of June 4, 2024 and four trains were observed with a fifth, an empty departing as I was arriving, which happens to me a lot!

This was the first time out for some months due to a number of issues, the car went to Perth to have the roof replaced and some other rust repairs, this was deemed cheaper than a replacement vehicle. I also managed to damage my primary everyday lens, the Canon 28-300 L, and broke the GPS unit on my camera setup. The Canon 5DIII body seems to have survived coming off the car at 60 km/h on Ballast Road at Hampton, Kalgoorlie, but I have noticed some strange exposures when using my other lenes, so a new camera may have to be planned for, testing is continuing. I have only just ordered a new replacement 28-300 mm L series Canon lens, and it seems these may have also now been discontinued by Canon...

However, I digress, back to the rail action, so, four trains were seen in a couple of hours out, two empty departures from the port and two loaded arrivals, one with a quad loco combination which is usually the bank engines being returned for servicing.

Port yard pilot locomotive was aging GE 9-44CW unit 004 shunting the compressor cars from the empty tracks to the rear of the loaded rakes.

The first empty train was SD70ACe-P6 units 729 leading SD70ACe/LCi unit 717 in the standard locomotive pairing that is in use on FMG with 119 waggon pairs for 238 waggons which departed the port at 1529 hrs.

Then at 1538 hrs a loaded train rolled under the Great Northern Highway overpass and into the Port behind the pairing of SD70ACe/LCi unit 713 leading the class leader of the AC44C6M rebuild model locomotives 101. This train also had 119 waggon pairs for 238 empty waggons.

A second loaded followed the first some twenty minutes later at 1608 hrs but this time it had quad locomotive power on the front. This is usually due to mine bank engines being returned to town for servicing requirements and happens on a regular basis.

AC44C6M locomotive 111 led SD70ACe/LCi unit 704 with AC44C6M pair 114 and 103 rounding out the quaddie with yet again 119 waggon pairs for 238 empty waggons. It is nice to see FMG sticking to consistent train lengths as in the past I have counted quite a variance in the number of waggon pairs per service.

The final train for the afternoon was an empty departing at 1634 hrs behind AC44C6M unit 117 leading SD70ACe/LCi locomotive 706 and the now standard 119 waggon pairs for 238 empty waggons.

Enjoy!

Ten SD70ACe's and only one 9-44CW seen in a few hours. Pt 2.

Further to the earlier post, on the 27th of December 2023 an arvo out near FMG saw three empty trains all with a pair of SD70ACe variants and two loaded trains with another pair of SD70ACe units and one with an aging 9-44CW leading, and yep, another SD70ACe.

The second queued empty behind 704 and 713 from the below post was sitting at the 27-kilometre post headed up by SD70ACe-P6 unit 727 with serial number 20188761-006, build date of 11/2019 and SD70ACe/LCi unit 703 with serial number 20118611-003, built back in 8/2012.

The FMG SD70ACe-P6 units were an extension of a Norfolk Southern build #20186662 road numbers #1215 to 1224 from November 2018.

The first loaded train appeared at 1648 hrs behind SD70ACe/LCI pair 719 serial number 20118693-011 built back in August 2012 and was the final unit from the second order of SD70 units and class leader 701 "T155 - Glen Davies" with serial number 20118611-001, also from August 2012.

Two hundred and forty loaded waggons in one hundred and twenty pairs are behind 719 and 701 as they head for the dumpers at Port Hedland seen here passing between the two empty trains. 1648 hrs on the 27th December 2023.

FMG arvo action 1st June 2023.

Well, finally have my trusty Canon EF28-300mm f/3.5-5.6L IS USM back from repair after serval months since failing during September 2022. So, a test arvo out at my favourite FMG hack spot was undertaken.

First train of the arvo was FMG's EMD SD70ACe/P6 unit 725 serial number 20188761-004 leading stablemate SD70ACe/LCi unit 707 serial number 20118611-007 and General Electric 9-44CW unit 002 serial number 58179 as the triple header departs the port with an empty train for the mines. 1600 hrs 1st of June 2023.

The above image was taken at 300 mm, or full zoom, settings were an ISO of 250 and shutter of 1/640th with an aperture of F9 and handheld, pretty happy with the results as it matches the performance I experienced with the lens prior to the failure.

The above image was taken at 60 mm, settings were an ISO of 250 and shutter of 1/640th with an aperture of F9. Slightly brightened and some contrast.

Second movement of the arvo was the port pilot shunting out and back to allow another empty train to depart the port. The pilot locos were EMD SD70ACe/LCi 711 serial number 20118693-003 and GE rebuild AC44C6M 106 serial number 50634 with compressor car set CC005.

I took this shot out wide to show some of the industrial hardware that surrounds the port areas around Port Hedland. The power lines that crisscross the landscape also pass under the rail corridor. Photo detail was 50 mm at ISO 250 with a shutter of 1/800th and an aperture of F7.1.

The final movement for the arvo was a double header with FMG's EMD SD70ACe/P6 class leader locomotive 722 serial number 20188761-001 leading older stablemate SD70ACe/LCi unit 704 with serial number 20118611-004 departing the port with an empty train for the mines at 1638 hrs on the 1st of June 2023.

Taken in the golden hour before sunset, image taken at 50 mm at ISO 250 with a shutter of 1/640th and an aperture of F8.

How to spot an SD70ACe-P6.

The only way to tell an SD70ACe-P6 model unit from a standard unit is the difference in height of the inverter cabinet located on the observers or left-hand side immediately behind the cab. The -P6 is slightly higher and is noticeable on Aussie units as we have a kickplate on our handrail assemblies.

The -P6 model has an inverter per axle to allow better traction control and therefore greater adhesion over the standard model which has an inverter per bogie or truck.

The attached picture shows the step height change on FMG SD70ACe-P6 unit 727 serial 20188761-006 built in Nov 2019. The FMG order was built to the same specs and at the same time as the final ten units of Norfolk Southern order for 50 units #1175-1224.

• FMG Roster page

• NSDash9.com roster page

FMG operating new EMD SD70ACe-P6 model locomotives.

Back in February 2020 two deliveries of five locos each were unloaded at Port Hedland then delivered via road to FMG. The ten units were built by Progress Rail at their Electro-Motive factory in Muncie. The units were built the same time as an order was being built for Norfolk Southern and the FMG units were delivered pretty much identical to the NS order. With the Australian standard handrails being installed locally.

The units are the SD70ACe-P6 and they have an inverter per axle rather than the standard inverter per bogie (or truck) giving better traction control and also have a higher rated T3 compliant prime mover the 16-710G3C-T3 for 4500 horsepower.

Some videos of the units running trains can be found here: Shift Pig Youtube videos.